100BASE-T1 – FibreCode-Shop https://shop.fibrecode.com Mon, 19 May 2025 12:43:26 +0000 en-US hourly 1 https://shop.fibrecode.com/wp-content/uploads/2022/03/fc_icon_rounded_256-100x100.png 100BASE-T1 – FibreCode-Shop https://shop.fibrecode.com 32 32 shopengine_activated_templates a:1:{s:6:"single";a:2:{s:7:"default";s:2:"en";s:4:"lang";a:1:{s:2:"en";a:1:{i:3;a:3:{s:11:"template_id";i:421;s:6:"status";b:1;s:11:"category_id";i:0;}}}}} FC612 USB 100BASE-T1 Stick Raw https://shop.fibrecode.com/product/fc612-usb-100base-t1-stick-raw/ Wed, 09 Mar 2022 10:41:15 +0000 https://shop.fibrecode.com/?post_type=product&p=102 The FC612 USB 100BASE-T1 Stick Raw represents a compact hardware interface connecting MS-Windows and Linux based PCs with automotive Single Pair Ethernet (SPE) network devices and switches. Network standards like OABR (OPEN Alliance BroadR-Reach) and 100BASE-T1 are supported.

The FC612 USB 100BASE-T1 Stick Raw functions as full-featured Layer2 receiver and transmitter on a 100BASE-T1 automotive Single Pair Ethernet network. In comparison to the standard FC602 USB 100BASE-T1 Stick the FC612 USB 100BASE-T1 Stick Raw is not installed as network device on the Host PC, but comes with an API (Broadway2 C-API) to get full access to Layer2 raw data on a 100BASE-T1 automotive network.

The FC612 can be used for the analysis, simulation, test and validation of automotive Ethernet networks. Flexible software APIs feature full access to NXP TJA1101 PHY internal registers. This enables cable testing and network diagnosis.

 

Features

Hardware

  • NXP TJA1101 100BASE-T1 PHY with full support for Sleep/Wake-up (TC10 compliant)
  • OABR/BroadR-Reach/100BASE-T1 physical interface with UTP connector
  • NXP LPC4333 32-bit ARM Cortex-M4/M0 microcontroller
  • High-Speed USB 2.0 device interface with Type-A connector
  • Network Master/Slave configuration via hardware switch
  • USB powered
  • Compact and modular design

 

Software/Firmware

  • MS-Windows and Linux compatible
  • USB Bulk data In/Out to Ethernet Layer2
  • Powerful and flexible API for TJA1101 SMI access
  • Common C-API and Python wrapper
  • Python abstraction class for TJA1101 MDIO register
  • Python and C++ sample applications
  • Python GUI-Application to control and view TJA1101B settings,
    e. g. Master/Slave, TestModes, Loopback-Modes, Sleep/Wake-up (TC10 compliant), SQI, …
  • Firmware update via USB

 

Applications

The USB interface of the FC612 USB 100BASE-T1 Stick Raw allows seamless connection to a broad variety of PCs, notebooks and embedded platforms. This enables the FC612 USB 100BASE-T1 Stick Raw for the following use cases:

  • MS-Windows and Linux PC used as raw protocol analyzer for 100BASE-T1 networks
  • Reception of raw Ethernet frames incl. 64-bit timestamp and sequence counter
  • Decoding of ethernet raw frames with Python pypacker to ICMP, UDP/TCP-IP ..
  • Transmission of Ethernet data supporting access to MAC, VLAN and raw data section
  • AVB/TSN network testing
  • Point-to-Point automotive Ethernet 100BASE-T1 network connection using two USB 100BASE-T1 Sticks Raw
  • Evaluation of NXP TJA1101 100BASE-T1 PHY chip with full access to SMI registers
  • Automotive Ethernet network simulation and demonstration

 

Requirements

  • MS-Windows 10 or Linux host platform (e.g. PC, Laptop, Raspberry Pi)
  • USB 2.0 host port

 

 

]]> FC602 USB 100BASE-T1 Stick https://shop.fibrecode.com/product/fc602-usb-100base-t1-stick/ Wed, 09 Mar 2022 10:37:12 +0000 https://shop.fibrecode.com/?post_type=product&p=90 The FC602 USB 100BASE-T1 Stick represents a compact hardware interface connecting MS-Windows and Linux based PCs with automotive Single Pair Ethernet (SPE) network devices and switches. Automotive Ethernet network standards OABR (OPEN Alliance BroadR-Reach) and 100BASE-T1 are supported.

The FC602 USB 100BASE-T1 Stick functions as seamless media converter between a standard USB 2.0 interface and a 100BASE-T1 automotive Single Pair Ethernet network. On Windows and Linux host PCs the FC602 USB 100BASE-T1 Stick is detected as standard Ethernet device.

Flexible software APIs feature full access to the NXP TJA1101 PHY internal registers. This enables cable testing and network diagnosis.

 

Features

Hardware

  • NXP TJA1101 100BASE-T1 PHY
  • OABR/BroadR-Reach/100BASE-T1 physical interface with UTP connector
  • NXP LPC4333 32-bit ARM Cortex-M4/M0 microcontroller
  • High-Speed USB 2.0 device interface with Type-A connector
  • Network Master/Slave configuration via hardware switch
  • USB powered
  • Compact and modular design

 

Software/Firmware

  • MS-Windows and Linux compatible
  • Standard Ethernet Network device on host PC
  • USB CDC/ECM driver for MS-Windows
  • Powerful and flexible API for TJA1101 SMI access
  • Common C-API and Python wrapper
  • Python abstraction class for TJA1101 MDIO register
  • Python and C++ sample applications
  • Firmware update via USB

 

Applications

The USB interface of the FC602 USB 100BASE-T1 Stick allows seamless connection to a broad variety of PCs, notebooks and embedded platforms. The USB Control and CDC/ECM profiles enable the usage of USB hosts running MS-Windows as well as Linux operating systems. This enables the USB 100BASE-T1 Stick for the following applications:

  • Standard Ethernet network device supporting OABR/BroadR-Reach/100BASE-T1 pyhsical interface
  • MS-Windows and Linux PC used as protocol analyzer (Wireshark) for 100BASE-T1 networks
  • Point-to-Point automotive Ethernet network connection using two USB 100BASE-T1 Sticks
  • Evaluation of NXP TJA1101 100BASE-T1 PHY chip with full access to SMI registers
  • 100BASE-T1 cable testing and network diagnosis
  • Simulation of multiple nodes on automotive Ethernet switch designs
  • Automotive Ethernet network simulation and demonstration

 

Requirements

  • MS-Windows 10 or Linux host platform (e.g. PC, Laptop, Raspberry Pi)
  • USB 2.0 host port
]]>