Misc­ellaneous – FibreCode-Shop https://shop.fibrecode.com Wed, 04 Jan 2023 13:13:37 +0000 en-US hourly 1 https://shop.fibrecode.com/wp-content/uploads/2022/03/fc_icon_rounded_256-100x100.png Misc­ellaneous – FibreCode-Shop https://shop.fibrecode.com 32 32 shopengine_activated_templates a:1:{s:6:"single";a:2:{s:7:"default";s:2:"en";s:4:"lang";a:1:{s:2:"en";a:1:{i:3;a:3:{s:11:"template_id";i:421;s:6:"status";b:1;s:11:"category_id";i:0;}}}}} FC900631 Closed Housing for FC631 https://shop.fibrecode.com/product/fc900631-closed-housing-for-fc631/ Thu, 12 May 2022 12:52:06 +0000 https://shop.fibrecode.com/?post_type=product&p=526 By default the FC6xx 100BASE-T1 and 10BASE-T1L USB sticks are delivered with an open housing consisting of a colored sub-shell. The top side of the FC6xx USB sticks is visible and unprotected. For standard applications where the USB sticks are operated on the desk this is not an issue. In case the USB sticks are used in a rough environment the FC9006xx Closed Housing can be used to protect the USB sticks.

 

Features

  • Closed housing for 100BASE-T1 and 10BASE-T1L USB sticks
  • Replacement for standard sub-shell
  • Opening for seamless cable connection
  • Including light pipe for LED
  • 3D-printed
]]> FC900621 Closed Housing for FC621 https://shop.fibrecode.com/product/fc900621closed-housing-for-fc621/ Thu, 12 May 2022 12:50:44 +0000 https://shop.fibrecode.com/?post_type=product&p=525 By default the FC6xx 100BASE-T1 and 10BASE-T1L USB sticks are delivered with an open housing consisting of a colored sub-shell. The top side of the FC6xx USB sticks is visible and unprotected. For standard applications where the USB sticks are operated on the desk this is not an issue. In case the USB sticks are used in a rough environment the FC9006xx Closed Housing can be used to protect the USB sticks.

 

Features

  • Closed housing for 100BASE-T1 and 10BASE-T1L USB sticks
  • Replacement for standard sub-shell
  • Opening for seamless cable connection
  • Including light pipe for LED
  • 3D-printed
]]> FC900612 Closed Housing for FC612 https://shop.fibrecode.com/product/fc900612-closed-housing-for-fc612/ Thu, 12 May 2022 12:49:31 +0000 https://shop.fibrecode.com/?post_type=product&p=524 By default the FC6xx 100BASE-T1 and 10BASE-T1L USB sticks are delivered with an open housing consisting of a colored sub-shell. The top side of the FC6xx USB sticks is visible and unprotected. For standard applications where the USB sticks are operated on the desk this is not an issue. In case the USB sticks are used in a rough environment the FC9006xx Closed Housing can be used to protect the USB sticks.

 

Features

  • Closed housing for 100BASE-T1 and 10BASE-T1L USB sticks
  • Replacement for standard sub-shell
  • Opening for seamless cable connection
  • Including light pipe for LED
  • 3D-printed
]]> FC900602 Closed Housing for FC602 https://shop.fibrecode.com/product/fc900602-closed-housing-for-fc602/ Thu, 12 May 2022 12:36:35 +0000 https://shop.fibrecode.com/?post_type=product&p=519 By default the FC6xx 100BASE-T1 and 10BASE-T1L USB sticks are delivered with an open housing consisting of a colored sub-shell. The top side of the FC6xx USB sticks is visible and unprotected. For standard applications where the USB sticks are operated on the desk this is not an issue. In case the USB sticks are used in a rough environment the FC9006xx Closed Housing can be used to protect the USB sticks.

 

Features

  • Closed housing for 100BASE-T1 and 10BASE-T1L USB sticks
  • Replacement for standard sub-shell
  • Opening for seamless cable connection
  • Including light pipe for LED
  • 3D-printed
]]> FC900701 Trigger Extension for USB Sticks Raw https://shop.fibrecode.com/product/fc900701-trigger-extension-for-usb-sticks-raw/ Mon, 02 May 2022 13:37:53 +0000 https://shop.fibrecode.com/?post_type=product&p=494 The FC900701 Trigger Extension represents a hardware module used to extend the functionality of the FC612 USB 100BASE-T1 Stick Raw and the FC631 USB 10BASE-T1L Stick Raw by external trigger input and output events.

A parallel cabel is used to connect the FC900701 Trigger Extension board and the USB sticks. For connection of external trigger signals the FC900701 Trigger Extension features simple to use screw terminals.

External trigger input events are timestamped in context with Ethernet traffic. Trigger output events are generated on detection of configurable EtherTypes.

 

Features

Hardware

  • Support for external trigger input and output signals
  • Screw terminals for seamless connection of trigger signals
  • Parallel cable for connection to FC612 and FC631

 

Software/Firmware

  • Trigger input events timestamped in context with Ethernet traffic
  • Trigger output events generated on detection of configurable EtherTypes
  • Python API to configure trigger input and output events

 

Applications

The FC900701 in combination with the FC612 USB 100BASE-T1 Stick Raw and FC631 USB 10BASE-T1L Stick Raw enables connection to embedded hardware platforms used to generate and receive dedicated trigger events. The following are example applications:

  • Synchronize external trigger input events (e. g. CAN message trigger) to Ethernet traffic
  • Generate trigger output event based on configurable EtherType
  • Connect 100BASE-T1 or 10BASE-T1L device and GPIOs for realtime latency measurement
  • Verify Precision Time Protocol (PTP) timestamping
  • Use Wireshark to display 100BASE-T1 and 10BASE-T1L Ethernet and trigger input events

 

Requirements

  • FibreCode FC612 USB 100BASE-T1 Stick Raw or FC631 USB 10BASE-T1L Stick Raw
  • External hardware to generate and received trigger events
]]> FC900302 UTP Ethernet Cable https://shop.fibrecode.com/product/fc900302-utp-ethernet-cable/ Wed, 09 Mar 2022 11:04:02 +0000 https://shop.fibrecode.com/?post_type=product&p=115 For connection of 100BASE-T1 automotive Ethernet devices and 10BASE-T1L industrial Ethernet devices a unshielded twistet pair (UTP) cable is required. The FC900302 UTP Ethernet Cable represents such a cable.

The FC900302 UTP Ethernet Cable has a length of 2 m and is providing on both ends cable sleeves for seamless connectivity to screw terminal blocks as provided on countless numbers of evaluation and custom printed circuit boards.

 

Features

  • Cable type: FLR9Y
  • Cable length: 2 m
  • Cable head: Cable end sleeves
  • Core: 0,35 mm²
  • Core arrangement: 2 cores twistet together (Length of lay 13 mm)
  • Color: green & white
]]> FC401 USB SMI/SPI Adapter https://shop.fibrecode.com/product/fc401-usb-smi-spi-adapter/ Wed, 09 Mar 2022 10:55:02 +0000 https://shop.fibrecode.com/?post_type=product&p=110 incl. 10x colored fly-wires, USB cable (USB 2.0 Type-A to Micro-B, black, 2 m) and green sub-shell]]> The FC401 USB SMI/SPI Adapter represents a hardware module connecting MS-Windows and Linux based host PCs with evaluation boards as well as custom boards featuring Ethernet PHY transceivers or switches with SMI and/or SPI interface.

The FC401 USB SMI/SPI Adapter provides an USB 2.0 interface and a SMI as well as SPI port. The USB interface is used for connectivity to a MS-Windows or Linux host PC. The SMI and SPI ports are used to realize a connection to evaluation and custom boards.

On the host PC the FC401 USB SMI/SPI Adapter is detected as Ethernet device. Flexible software APIs provide seamless access to Ethernet PHY transceiver internal registers via SMI and SPI interface.

 

Features

Hardware

  • High-Speed USB 2.0 device interface
  • USB 2.0 Micro-AB connector
  • SMI and SPI connectivity via standard 2,54 mm 18-pin header
  • NXP LPC4333 32-bit ARM Cortex-M4/M0 microcontroller
  • USB powered
  • Compact and modular design
  • Incl. USB cable and colored fly-wires

 

Software/Firmware

  • MS-Windows 10 and several Linux distributions are supported
  • Common C-API and Python 3.x wrapper
  • Software API to access Ethernet PHY transceivers and switches internal registers
  • Python GUI to read and write register values via SMI and SPI
  • Python and C++ sample applications

 

Applications

The USB interface of the FC401 USB SMI/SPI Adapter allows seamless connection to a broad variety of PCs, notebooks and embedded platforms. The USB control access via Broadway2-API enables the usage of USB hosts running MS-Windows as well as Linux operating systems.

The standard 18-pin header in combination with colored fly-wires enables connectivity to SMI and SPI ports of evaluation and custom boards to access Ethernet PHY transceivers and switches.

The FC401 USB SMI/SPI Adapter can be used for the following use cases:

  • Seamless access to evaluation boards and custom boards via SMI and SPI interface
  • Access to Ethernet PHY transceivers and switches via SMI and SPI interface
  • Configuration and verification of Ethernet PHYs and switches
  • Setup and control test-modes, loopback-modes etc. of Ethernet PHY transceivers and switches
  • Verification of custom designed PHY and switch boards using FC401 in combination with FC6xx as link-partners

 

Requirements

  • MS-Windows 10 or Linux host platform (e.g. PC, Laptop, Raspberry Pi)
  • USB 2.0 host port
]]>